top of page


Live Streaming Dash Cam

User Manual



To prepare for the installation you will need the following:                      

  • Review product and parts: Your package should include the device with wiring harness.

  • Research your vehicle wiring diagram for the location of the Ignition sense location, check your owner’s manual or look it up online

  • Gather needed tools, including screwdrivers, wire strippers and cutters, crimping tool, voltmeter, zip ties and Velcro strips. If you do not have the tools or the experience, we highly recommend that you let a professional do the installation of your GPS Tracker.

  • If you need assistance installing your device you can contact a local mechanic or a car radio installer like Best Buy.

Wiring Diagram

Schematic Falcon Manual Setup

Interface Descriptions

Schematic Falcon Manual Setup Wiring Diagram

Installation Instructions

The red wire will need to be connected to a constant +12V source. This can easily be located under the dash; fuse panels are good places to start, as well as the thicker gauge wires.

The black wire will need to be connected to a solid ground or negative battery terminal. Always use a bolt directly connected to the chassis to ensure a good ground. Using smaller bolts connected to secondary frames will result in occasional power loss.

The orange wire will need to be connected to an ignition source (Something that requires +12V when the vehicle is on and 0V when the vehicle is off). Verify the ignition wire by measuring the operating voltage while the key is turned to the on or start position (the voltage should read 0 vdc when the key is in the off position, and between 11V and 14V when in the on position.

Note: Be sure to wrap the positive and negative connections with electric tape after wires are connected.

Use the included double-sided tape to secure the Dashcam holder/bracket directly onto your window. Make sure the geared side of the bracket is facing left. We suggest placing it to the right or left of your rear-view mirror but can be placed anywhere you prefer. Allow a minimum of 1 hour for tape to set.

When attaching the DashCam, make sure the geared side of the attachment is on the left side, matching the holder that is attached to the window. The DashCam lights LEDs should be facing the driver / interior cabin. Install the screw and bolt & keep them loose until you’re DashCam is in its final position. Hand tight when ready.

Keeping drivers safe and productive is a challenge for any company.

Our live streaming dashcams allow you to keep an eye on your drivers, even when they are out of sight. You can make sure that your policies are being followed, provide coaching, and ensure the safety of all involved. We want to help you get more from your fleet by providing tools that improve driver performance and safety!

With our live dashcam service we will install a HD camera in each vehicle that streams footage directly into our cloud based dashboard where you can watch what's going on at any time. This gives you the ability to monitor every aspect of your fleet so you know exactly how things are going while allowing employees privacy while driving if needed. You'll be able to see who is following policy or not, which vehicles have problems with speeding or hard braking, plus much more!

bottom of page